Skip to the beginning of the images gallery

D3 Inner Belt v1

In stock

Only %1 left

STARTING AT $35.00

Item Description

The D3 Inner Belt v1 provides a comfortable and streamlined system for secure attachment to the D3 Belt v1, D3 Belt or any other VELCRO® Brand hook and loop inner/outer belt system (two-piece belt system). Thoughtfully designed with VELCRO® Brand hook and loop closure for a comfortable and highly adjustable fit. The nylon webbing and nylon edge binding finish increase the lifespan and reduce pilling while providing a semi-rigid platform for use as an everyday carry belt when running an IWB holster.

Made in the USA from USA materials (Berry Compliant)

Item Comes With

(1) D3 Inner Belt v1

Note: The D3 Belt v1 comes with a D3 Inner Belt v1, this item is offered as a replacement inner belt or for everyday use. The D3 Inner Belt v1 is 4” longer than the corresponding D3 Outer Belt v1 of the same size.

PRODUCT SPEC

Dimensions

Small: 37" (L) x 1.75" (H), 3.7oz
Medium: 43" (L) x 1.75" (H), 4.1 oz
Large: 47" (L) x 1.75" (H), 4.5 oz
XL: 51" (L) x 1.75" (H), 4.9 oz
XXL: 55" (L) x 1.75" (H), 5.4 oz

Construction

MIL-SPEC nylon webbing
VELCRO® Brand loop
VELCRO® Brand HTH extruded hook at closure for added tensile strength

Product Liability Nylon Products

This manual should be read by all persons who have or will have the responsibility for using or maintaining this product. Any warranties by Haley Strategic Partners LLC with respect to this product are voided if the product is not used and maintained in accordance with the instructions in this manual. The following are general safety warnings intended to call attention to the fundamental performance limitations and areas of the product where proper usage must be followed. Failure to use and maintain the product according to the instructions and warnings contained herein may result in the product failing to perform as designed.

FAILURE TO COMPLY WITH ANY OF THE INSTRUCTIONS OR WARNINGS WILL RESULT IN FAILURE, WHICH SUCH FAILURE MAY RESULT IN SERIOUS INJURY OR DEATH

Inspect the product for discoloration, chemical contamination, excessive UV light exposure, cuts, tears, damaged threads/bartacks, abrasions or cracks before and after each use. If the product fails inspection, it must be destroyed or repaired by the manufacturer before further use.
DO NOT alter the product in any way
DO NOT repair the product in any way
DO NOT expose the product to open flame or excessive heat (this product is not flame resistant)
DO NOT use this product except in its intended manner

Nylon Products

If a defect in materials or workmanship is found in any of our nylon products, we will repair or replace it, free of charge. This excludes normal wear and tear. Products that we carry that are made by another manufacturer, such as North American Rescue, AXL, SOAR and others are subject to the warranty and service policies of those manufacturers. Be aware that the customer is responsible for any and all return shipping charges. This warranty applies to the original purchaser and is non-transferrable. Proof of purchase will be required.

Normal use allows for a 3-year life of this product, due to natural degradation of materials, if this product is 7-years old it should be destroyed (even if unused)
All replacement parts must be acquired from Haley Strategic Partners LLC or a licensed dealer partner

EXCEPT FOR THE FOREGOING WARRANTY, SUPPLIER MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND, EXPRESS, IMPLIED OR OTHERWISE, AND SPECIFICALLY DISCLAIMS (i) ANY WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO PRODUCTS, AND (ii) ANY LIABILITY WITH RESPECT TO ANY PRODUCTS THAT, AFTER DELIVERY TO CUSTOMER, CUSTOMER HAS ALTERED, MODIFIED OR TAMPERED WITH, SUBJECT TO MISUSE, NEGLIGENCE OR OTHERWISE DAMAGED, OR HAVE BEEN STORED, HANDLED, OR USED IN A MANNER CONTRARY TO APPLICABLE LAWS OR REGULATIONS OR SUPPLIER’S DIRECTION.

Product Liability D3 Belt

The D3 Belt was independently tested to meet and exceed the UIAA 105 load rating standards but is NOT certified by the UIAA due to the exclusion of leg loops. The D3 Belt must be used in conjunction with appropriate, load rated leg loops that meet or exceed EN12277:2016 to form a Type C Sit Harness when used for rappelling, restraint, or other tethering operations.

FAILURE TO COMPLY WITH ANY OF THE INSTRUCTIONS OR WARNINGS WILL RESULT IN FAILURE, WHICH SUCH FAILURE MAY RESULT IN SERIOUS INJURY OR DEATH.

Inspect the product for discoloration, chemical contamination, excessive UV light exposure, cuts, tears, damaged threads/bartacks, abrasions or cracks before and after each use. If the product fails inspection, it must be destroyed or repaired by the manufacturer before further use.
Inspect the hardware to ensure there are no cracks, debris, or other visible damage that could compromise the secure closure of the hardware.
DO NOT alter the product in any way
DO NOT repair the product in any way
DO NOT expose the product to open flame or excessive heat (this product is not flame resistant)
DO NOT use this product except in its intended manner

Belt Size	Waist Measurement	MOLLE Field
Small	32-35"	20 Columns
Medium	35-38"	22 Columns
Large	38-41"	24 Columns
X-Large	41-44"	26 Columns
IMPORTANT
Waist size is NOT the same as pant size Measure your waist over your pants as shown with a flexible tape measure or string. If you fall between sizing intervals, size up.